How To Download And Install Hl Booster In Counter Strike

Download  here The hl booster.rar , unzipp the file (directly in addons or copy the booster folder in HLDScstrikeaddons, (HLDS is the directory where you have the server), then edit in HLDScstrikeaddonsmetamodplugins.ini,the
line:win32 addonshlboosterdlls ooster_mm.dll. Very important!!!! In order to work, in the HLDScstrikeserver.cfg you have to write the next line:

exec addons/hlbooster/hlbooster.cfg

Please UnCheck The Tick/Mark

Download HL-Booster

How To Do Fiio e5 Battery Replacement Change Yourself

If you have an fiio e5 portable headphone amplifier and you notice that the battery life doesnt last as long, as it states in the user manual or reviews and drains within in a couple of minutes operating the device at full volume levels, it is very likely that the battery that is inside it has become faulty overtime. This can occur if you have used an charger that has the wrong amount of voltage to charge the battery up or it could be because of general wear and tear, from everyday use. If this is the case, then dont chuck it in the bin because you can open it, remove the old battery and replace the battery with an new ipod shuffle battery that you can buy from Ebay or Amazon for dirt cheap and will get your amp pumping sound once again.

Instructions on how to repair the amp:

1) You will see a small screw that holds the clip in place, the clip that you use to attach the amp to your trousers. Using a small head Philips screwdriver unscrew that screw, this is so the clip can become detached from the device.

2) Place the screw in a place where you can remember it because you dont want to misplace it. Then remove the spring and the metal clip.

3) Then you will see to small white colored tabs, on the slide where the clip was attached to. Get a small flat head screwdriver and press them both in using it, so the middle section of the amplifier can remove itself from the metal housing that it is currently fitted into.

4) Once you have done that and then slide out the middle section of the amplifier outwards and place the metal housing down. You will then see the battery, remove it from the circuit board, to do that you will need to use your flat head screwdriver to pry it out. 

5) Then get an soldering iron, plug it in, once the tip is hot enough to melt solder, unsolder the two wires that are connected onto the circuit board and place the soldering iron down. Make sure you remember where the positive and negative battery wires go because you will need to find them when you hook up your new replacement battery.

You can use the image provided below for guidance:

6) Then chuck the dead battery away in the bin, then get your new replacement ipod shuffle battery and solder the two wires back onto the solder locations, where the previous wires were attached from the damaged battery, using some fresh solder wire and your soldering iron. Then turn the soldering iron off from the mains and allow it to cool down.

7) Then place the battery back into its location, then reinsert the white colored housing into the metal black color housing, by slotting it in. Then reposition the metal spring, place the clip onto the amp and insert the screw into the hole and screw it together.

8) Once you have reassemble the fiio e5 amplifier back together, fully charge the battery and the device will be ready for you to use with your ipod.

How To Make a Slow Sony Ericsson W995 Faster

If you experience that your Sony Ericsson w995 is buggy and slow, it can lead to the mobile phone screen to hang and freeze up the mobile phone, making it unusable. I have a Sony Ericsson w955 as my daily mobile phone and the sound quality for music is great, but even for me, this handset performs so slow, so i came up with tips to help speed up the processor and ram speed and it helped increase the phones performance dramatically. So i have listed them tips below, so you can also make your w995 faster.

1)Close any applications or games that are running in the background , if you are not using them. If they are left running, the ram is clogged up, the CPU is slowed down and the battery life decreases.

2)You may have too many files stored on the phone memory or memory card, too many files cause the CPU to slow down because it has to work hard to find them. So delete any unwanted files you no longer need or use.

3)Make sure it is running the latest software version, as it has improvements on the speed and stability of operating system.

4)Make sure you are not using themes with lots of high resolution graphics and animations, as if you do use them, they can slow down the CPU speed, as it has to work extra hard to load the graphics and animations. So stick to the stock Sony Ericsson theme.

5)Every day you should restart the mobile phone. This is by powering it off, by holding the on/off key down for 5 seconds. Then remove the battery from the phone for 30 seconds and then reinsert the battery and then turn on the phone.

6)Make sure that the phone is virus free because mobile phones can catch viruses from websites that allow you to download free themes, games and ringtones. You can install a antivirus application onto the phone, to scan and find them unwanted viruses!

How To Replace The Battery Pack Inside a TomTom 720 GUIDE

If your TomTom 720 sat nav doesnt turn on because the battery is not charging, or the battery life is very poor because the battery is not holding charge and it is fully charged up, it is likely the battery pack inside the sat nav is faulty. So you will need order a replacement battery pack and then remove the old one and fit the new replacement battery pack. To do that you will need a appropriate size t5 torx screwdriver, this is to unscrew the screws.

Once you have the replacement battery pack, a screwdriver and some spare time on your hands, watch the video tutorial below because it shows you how to open the TomTom 720 sat nav and replace the battery:

How To Fix Squeaky Windshield Wiper Blades In The Car

Do your car windshield wiper blades make annoying squeaky noises when activated? 

If your car window wipers make squeaky noises when turned on, then they might need replacing. To identify if they need replacing, look at the blades of the window wipers, do they look brittle and worn out? If they look do look like that, then they are damaged or certainly worn out, which is the cause for you to hear squeaky noises, when you use the window wipers. When replacing them, make sure you buy good quality wipers blades from brands like Bosch, as cheap wiper blades are common to be squeaky, even if they are brand need. On average, it is recommended that you change your cars wiper blades at least once every year, to prevent any squeaky noises to occur.

If you have inspected your cars windshield wipers and they are not worn out, then wipe the blades of the wipers, using a wet soft cloth. The wiper blades can have excess dust and dirt on the blades that can cause squeaking, giving them a clean will get rid of dust and dirt. As well as cleaning the windshield wipers, wipe the window using a wet soft cloth, this is to remove dust and dirt from the window.